MyCell Alien SX4 VPro Flash File MT6580 Lcd Fix | Firmware |
MyCell Alien SX4 VPro Flash File MT6580 Lcd Fix Firmware
If you are looking for a way to flash your MyCell Alien SX4 VPro smartphone and fix the LCD problem, you have come to the right place. In this article, we will show you how to download and install the official firmware for your device and solve the LCD issue.
What is MyCell Alien SX4 VPro Firmware?
The firmware is the software that runs on your MyCell Alien SX4 VPro device. It controls the hardware, such as the camera, the speaker, the touch screen, and the network. The firmware also contains the operating system, which is Android 7.1 Nougat in this case.
Download File: https://nuhieelte.blogspot.com/?file=2w4eZ5
Sometimes, the firmware may get corrupted or outdated due to various reasons, such as virus attack, power failure, improper flashing, or rooting. This may cause your device to malfunction, such as bootloop, hang on logo, slow performance, or LCD problem.
The LCD problem is when your device's screen does not display anything or shows distorted colors or lines. This may happen due to a faulty LCD panel or a damaged connector. To fix this problem, you need to flash the correct firmware that matches your device's hardware.
How to Download MyCell Alien SX4 VPro Firmware?
To download the official firmware for your MyCell Alien SX4 VPro device, you can use the link below. The file contains the firmware and comes in a zip package, which contains the flash file, flash tool, USB driver, and instruction manual.
Firmware name: Mycell_Alien_SX4_Vpro_MT6580_V2.34_26052019_7.1.zip
File size: 650 MB
Download link: [Mycell Alien SX4 Vpro - FIRMWARE OFICIAL]
Please note that this firmware is only compatible with the MyCell Alien SX4 VPro device with MT6580 chipset and Android 7.1 Nougat operating system. Do not use this firmware on any other device or variant, as it may cause serious damage or brick your device.
How to Flash MyCell Alien SX4 VPro Firmware?
To flash the firmware on your MyCell Alien SX4 VPro device, you need to follow these steps:
Download and extract the firmware package from the link above on your computer. You will have access to the firmware and other tools.
Install the provided USB driver on your computer. This will help your computer to recognize your device when connected.
Run the flash tool (SP Flash Tool) on your computer and load the scatter file from the firmware folder.
Click on Download button and connect your device to the computer via USB cable while holding Volume Down or Volume Up button.
The flashing process will start automatically and take a few minutes to complete.
When the flashing is done, you will see a green tick mark on the flash tool. Disconnect your device and reboot it.
Congratulations! You have successfully flashed the firmware on your MyCell Alien SX4 VPro device and fixed the LCD problem. You can now enjoy using your device with improved performance and stability.